Tuesday, March 2, 2021

Color Grading

Since color grading adds a final, strong cinematic look to film footage, I practiced, researched, studied many YouTube tutorials and watched a webinar from Denver Riddle, creator of Color Central and prolific colorist. 

(Research from: https://www.youtube.com/watch?v=RvFCnVRcT3Q)

From the Webinar:




Color Grading Notes

  1. Cinematic Look - Come up with a baseline of what you are looking for. Looking at other cinematic pieces often helps, especially when you add a frame of it into your Adobe Premiere (or whatever you use, DaVinci 16 is famous for its color grading capabilities). That way you can use comparison view and really see the specific differences between your shots and the color grade you want. 
  2. Base correction (change exposure and temperature, tint, highlight colors…)

Do a secondary color correction if one spot needs a fix. Use hsl curves or use a mask to color correct a specific part of a shot. Do secondary color correction to the whole image to better blend the HSL Secondary change you just made. 


3. Shot-to-shot consistency

Pick a “hero shot” with the best color and then use that to match the ones that aren’t as good. Click comparison view and then move the slider under the reference or current to find where you want the see the two shots in the timeline. This can help with the match tool. 


4. Adjustment layer

Right click and new layer, adjustment layer for whole piece. Drag this out on top of all of the work. Then add a LUT to this. You can make other adjustments to the adjustment layer (like lowering or increasing the intensity of a LUT, just remember that less is more, or adding to the exposure, a curve difference, cooler or warmer tones...etc) 


5. Create a look that aids with the emotion of the story 

This is the artsy step. The mood is at the end of the day in the eye of the artist, but using color rule, there are many "correct" answers for what colors illicit what moods. 


The day for night look - shooting in day to look like shots at night. Change blacks, blue tones, and exposure, HSL secondary on skin and parts that need emphasis to stay lighter. 


Color Scopes

Higher wave form is high wavelength. 

Gamma control for midtones. 


My Practice:

I practiced color grading with my short film (A Long, Long Love), shown here:
https://www.youtube.com/watch?v=PR24H1UXy60
I used a pink, warm color scheme to recreate the old, pink images found in 50s and 60s slide photography. My yellows and blues were also pale, also a 40s color scheme. 









I also did color grading in my edits of my friend's short film When the Dealing's Done, shown here: 


In these shots, I used a Western LUT which helped to make the browns and tans more pronounced and the blues more neutral. I did a lot of correcting to make specific parts darker or lighter or changed the color of the background wall to make it match both the color scheme and the other shots within the video. 











Here are some other videos I learned color grading from:

https://www.youtube.com/watch?v=PR24H1UXy60&t=27s

https://www.youtube.com/watch?v=RvFCnVRcT3Q&t=438s

I used these skills that I developed in my color grading for Novikof:

I used the comparison view to use the match tool and copy over the highlights, mid-tones, and shadows from the first shot onto the shot that I was on. For this particular video, I used the HSL Secondary tool to select the reds and then increase the intensity, but because I wanted to use the tool twice (again to make the whites specifically more yellow and not all of the shot) I had to export that shot then import it back into Premiere and then apply that second grade. 

Here, I was matching the colors of the lens flare shot I imported manually with the color wheels.

I lowered the blacks and raised the whites in many of the shots with the white curve. I did this on most of the shots as it makes them both more dramatic and more cinematic. 

Here I use the HSL Secondary tool to select the slightly orange parts so I can make it even more orange to match with the other scenes. 

I increased the exposure of this shot, which made it brighter. 

I wanted to decrease the exposure of the left side of the shot and not the right, so I made a mask of just that part and decreased the exposure of that part only. I then feathered it out so that the changed part would blend better. 

I created a vignette and effected the amount, midpoint, roundness, and feather of it for this shot I layered over the attack dog effect. 

After I used the match tool on the "current" shot, I manually changed the highlights, mid-tones, and shadows because it is inside and has a bit of different tones than the shot outside.

I tried adding different LUTs to the grade and chose "Folger." I lowered the intensity of the LUT and then applied it to an adjustment layer so I could easily put it on all of the shots. 

Here I use the HSL Secondary on the red tones in Novikof's shoe to make it more pink/red. By bringing down the exposure bar, I made the tone more intense. 

Here I use the HSL Secondary tool to select the building and its yellow tinge. I increase the yellow coloring to match it with the other shots and make it more aligned with the color scheme/three color rule. 

Another way to apply two separate HSL Secondary selections and changes is to nest the shot. The shot is not editable after that up until the first edit, but that is one method. I did this here. 

I matched the first indoor shot with another one. 


Here I graded that other indoor shot with two separate HSL Secondary grades. 

I used all of this color correcting and grading practice to make all of the shots in Novikof match and have the color scheme I wanted. 


Thursday, February 25, 2021

Drone Shots/Piloting Practice/Editing Shots

The establishing shot in my opening was to be very wide and show the actor playing Novikof from a high height (to indicate how small he is in this large space, running up to a large, sprawling building, adding to the fear he has in this mission and the audience's suspense). I needed to use my drone in order to create this aerial shot. 

I own the Holy Stone HS105 Electronic Image Stabilization Drone that (supposedly, although I don't think it looks like it) films in 4K. 


When I got this drone on November 19th for my birthday and had been practicing flying and recording with it since then to prepare for this shot. I have used it in a couple of projects (one for someone else and one for me). The first shot of my National Geographic travel piece was an aerial shot with this drone. 


Here is a breakdown of the drone's parts:
Reading the drone's manual, I learned that there are many intricate parts to both the drone and its transmitter.
4 propellers (A-D)
Lights 
Vision positioning lens
Battery
Battery indicator
Built-in phone holder
joysticks
LCD screen
folded handle
camera angle adjustment wheel
GPS mode switch

Here are the steps to how to get the drone to operate:
(Content and quotes from research: the drone's operating manual)

The drone's manual also explained how to connect the drone to the app on a phone (Ophelia GO) and how to operate some of the capabilities from the phone. 
Download the Ophelia GO from the Apple App store (a QR code is provided to take you there). Connect your phone to the wifi network (in settings) created by the drone. It will be called HolyStoneEIS with some numbers following that. Launch the app.
Hold the lock button on the transmitter and slide the power switch to the right to power on the transmitter. It will beep twice and the signal icon will flash. 
Short press on the Power Switch to turn the drone on, then place it on a surface with the head forward. 
Once the transmitter sends out a long beep sound and the signal shows on the LCD screen, the drone is then paired with the transmitter. 
You must then place the drone on the ground (on a level, flat surface, which often looks like a circular pad called a landing pad). The red, yellow, and green lights of the drone will alternate flickering for about 7 seconds to complete the initial detection. 
Then calibrate the compass!
Push both of the joysticks to the bottom right at the same time to enter compass calibration. Hold the drone horizontally and rotate it in three complete circles. The lights will then flash green. Hold the drone vertically and rotate the drone in three complete circles. When completed the front red lights and rear yellow lights will turn solid. 
Make a short press on the red lock button to unlock the motors. They will then rotate. If you push up the right joystick, the drone will start to fly at around 5 feet and hover. Move the joysticks more for more movement. The drone can go up to 99 feet in the air and 2 miles in distance from the phone and transmitter, so you can move all that way. 
By holding the red lock button for three seconds, the motor will lock again and the drone will stop flying. Only do this when the drone is very close to the ground already. 
You can adjust the angle of the camera during flight by spinning the tilt wheel on the transmitter (90 degree tilt range). 

Application to Novikof:



This part of the video was shot from the ground, as I clicked record on my phone before the drone left the ground. I was not going to end up using this beginning footage, but since Garrett's pant legs flapped in the wind so dramatically, I couldn't help but use it as the production company screen for the first shot. By color grading this footage, I could add some life and further display the 3 Color Rule, reiterating mood and continuity throughout the piece. I loved the depth of field in this shot and . I did have to use a distorting effect on all of the drone footage, however, as it does have a bit of a fisheye lens and the distorting effect bends it back to correct this. 
After the effects and text, the shots looked like this:

I also added a bit of a blur and a mask with lower exposure to the bottom of the screen to intensify the depth of field and make the text more legible.  




Filming and Editing the Interrogation Floodlight Flashback

Just like when Novikof sees the nice dog before entering the library, he sees the same color and shape of the interrogation lamp that swung above him in another childhood trauma. I edited this in because it adds intrigue to the character and further establishes context, mood, and motivations in the opening. The swinging light special effect hints at the context of totalitarian government or at least a group of terror-inducing people. This is also evident by the punching foley and screams of pain from an adult male. The audience is made very uneasy when from the elevator button's red light (as red light signals warning, just as I took notes about when watching the flood lights in the American submarine in Hunt for Red October). This special effect also adds to Novikof's motivation to run from the guard (as, in the audience's mind, the guard could be part of the group performing the torture referenced.  

I reached out to Patton Horton, an expert in antique and vintage wares, about where I might find vintage, industrial floodlights for the interrogation flashback. 

Some screenshots from Patton's Ebay:



But after all the money I had spent on other props and gear for this production, I decided to try using what I already had. My family owns a lot of antique lamps (although not overly industrial), and so I decided to turn a red (to match with the ring in the video it will be placed inside), vintage lantern upside down, attach it to a chain which hangs from the ceiling, and swing it back and forth in a dark room with the light on. Although the light itself is a warm yellow-white tone, I will color correct it in Premiere to match the red shade from the elevator button light. This lamp is located in Mims (Central Florida), about 3 and a half hours from my house. So I plan to go there in early March to find it and edit it in. I also plan to use this same lamp in the Creative Critical Reflection. 

I also heard that there was a similar light to the one I want in a small, local thrift store, so I called the owner and sent this inspiration photos over text for her to see if she had anything that could work. The owner text me that she didn't have, nor has ever had, anything like it, so I went to Habitat for Humanity.








Before I filmed that, however, I edited the elevator button light footage. 

To add emphasis to the sudden reaction Novikof experiences when seeing the lit circle in the same shade as the interrogation floodlights, I created a quick zoom animation on a CU, at a low angle to show it was coming from the POV of the button itself. I did this by keying the position of the shot, and I added easing to make it jerk less. I did this by right clicking on the last key and going to "temporal interpolation" and clicking "ease in" and then right click on the first key and then going to "ease out."

I used the "hard light" blend layer on the masked and feathered out shot of the elevator button light as to both fade the trigger (and then the trauma within the trigger) onto Novikof's face, communicating to the audience what he is thinking. 
The color could be seen clearly, but the darker parts would be more opaque, allowing Garretts face to be scene, implying that this was what he was thinking and that it illicit a strong reaction from him. 
By swinging the camera (and then slowing down the pacing through speed/duration controls) I created the movement of the swinging floodlight, further connecting the trigger to the traumatic memory.

When I zoomed in on this shot, I was sure to ease the keyed movement in scaling and position. This was so that the movement was smoother and I did it using the temporal interpolation, clicking
"ease in" on the keys at the end of the pair and then "ease out" on the keys at the start of the pair. 

I changed the speed of the clip where Garrett breathes deeply to manipulate the timing with the audio from the flashback and the score. I could also change for just how long his breath took. His wearing a mask gave me even more control over this, as his mouth did not give away just when he was breathing. 


I made a copy of this clip and reversed the speed of the second one before his breath. That way I could further increase the time before the breath and give more time for the flashback. 




These two screenshots show my editing of the breathing foley. I was able to incorporate lighter breathing and the white noise of the elevator and the elevator's movement sounds into the audio clip by fading out some clips and blending them with others. I used the exponential fade and layering audio clips over each other very often. 
This was how I created the interrogation floodlight effect. 



Character Map

The Four-System Map SYSTEM 1 — MOSCOW: NOVIKOV FAMILY + SCHOOL (Moral awakening under surveillance) This system’s function is: how a mind b...